|
VAT Number : IE 9656144 N Dave Coughlan : jgab@celtismar.com Ph 021 4831 539 - Mob 0879 626 197 |
|
|
|
A single boat, even in adverse weather weather conditions will not rupt these chains |
|
|
A slipnot around the ground chain secures the mooring. |
![]() |
|
We provide 30mm forged steel rings including 10mm wire mesh and block moulds to help you make your own anchor block. The ring is ex centered 30 cm away from gravity center to offer strong holding power, as anchors can do. |
|
|
|
RUPTURE The weight of chain will have to be supported by the mooring buoy |
| DIAMETER | KG/ METRE | RESISTANCE | |
| 14 MM | 4.4 KG / M | 6.200 DaN | |
| 16 MM | 5.4 KG / M | 8.050 DaN | |
| 18 MM | 6.8 KG / M | 10.200 DaN |
|
DESTRUCTIVE TESTS ON USED CHAINS
We have carried out experiments on the breaking strains of used chain in order to determine when it is necessary to change our mooring components. Remember the chain in use must always be capable of holding the vessel in all weather conditions. |
![]() |
|
For example an 18mm chain which spent 6 years underwater and reduced to 50% of its original diameter was still able to withold 9.5 tons before breaking. Before rupture the links had stretched up to 15% over the original pitch size (18mm). By surveying moorings & annually one can determine when mooring components should be replaced. |
![]() |
![]() IINISHGLAS is very efficient to layout ground chains |
|
|
|
|
|
|
|
|
|